Skin Depth & Effect Analyzer

Advanced Electromagnetic Analysis
Calculate AC Resistance ($R_{ac}$), Internal Inductance ($L_{int}$), Skin Depth ($\delta$), and Power Density heatmaps. Features Levasseur precision approximations, temperature correction, and high-precision material properties for Power (50/60Hz) and RF (MHz/GHz) applications.
LOAD SCENARIO:
Cu Busbar (50Hz)
RF Coax (100MHz)
PCB Trace (1GHz)
1. Material & Environment
2. Conductor Geometry & Load

Technical Reference Manual

Introduction

When Alternating Current (AC) flows through a conductor, a time-varying magnetic field induces eddy currents that oppose the main flow at the center and reinforce it at the surface. This "crowding" effect is the Skin Effect.

Concept

Skin Depth ($\delta$)

Defined as the depth where current density falls to $1/e$ (approx 37%) of surface density. At 5$\delta$, current is effectively zero.

$$ \delta = \sqrt{\frac{\rho}{\pi f \mu}} $$
Physics

AC vs DC Resistance

DC uses the full cross-section. AC uses a thin shell. The ratio $K_s = R_{ac}/R_{dc}$ increases with frequency. This calculator uses Levasseur's approximation for <0.5% error across the spectrum.

Analysis

Internal Inductance

At DC, $L_{int} = \mu/8\pi$ H/m. As frequency rises and current hugs the surface, the internal magnetic flux linkage drops to zero. Critical for signal integrity in PCBs.

Signal Integrity

Power Applications

For 50/60Hz busbars (>2000A), skin effect is significant. Engineers use hollow tubes or laminated bars to maximize surface area vs weight.

Power

RF Applications

At GHz, skin depth is microns. Conductors are often silver-plated to lower resistance at the surface where 99% of current flows. Core material conductivity matters less.

RF / Microwave

Frequently Asked Questions

Common questions about this engineering tool

1. Is this Advanced Skin Depth, AC Resistance calculator free to use?

Yes, the Advanced Skin Depth, AC Resistance is 100% free to use online with no registration, subscription, or software installation required. You can run unlimited calculations directly in your browser.

2. What engineering standards does this tool follow?

This tool is developed following internationally recognized engineering codes and industrial standards (such as IEC, IEEE, ISA, ASME, and API where applicable). Formula implementations are verified against established engineering design practices.

3. Can I use these results for professional design?

The calculations provided by the Advanced Skin Depth, AC Resistance are intended for engineering estimation, preliminary design, and verification purposes. While formulas strictly adhere to published technical standards, final project designs for construction or safety-critical applications should always be reviewed and approved by a licensed professional engineer (PE).

Level Up Your Engineering

Complete your design with these standards-compliant companion calculators.